Wireless Acccess Point Router
2.2.2 Getting Started
You may complete the following steps to install your Wireless Access Point Router
when you have all the information mentioned above on hand.
Step 1.
Power all devices down. This should include your PCs, Cable or DSL modem
and the Router.
Step 2.
Connect the Router to your PCs.
A.
Connect one end of a standard network cable to the 10/100 RJ-45 LAN ports
on the back of the
Wireless Access Point Router.
B.
Connect the other end of the cable to the PC.
Step 3.
Connect the Router to your Cable or DSL modem.
A.
Connect one end of a standard network cable to the RJ-45 WAN port on the
back of the Wireless Access Point Router.
B.
Connect the other end of the cable to either a Cable or DSL modem
Step 4.
Supply the power to the Router.
A.
Connect one end of the power cable to the Wireless Access Point Router.
B.
Connect the power cube end of the power cable to a standard wall outlet.
When the Router receives power, the Power LED should remain solid Green.
Step 5.
Supply the power to either your Cable or DSL modem.
Step 6.
Press the Reset button to restore the
Wireless Access Point Router‘s default
settings. Hold the button in for three seconds, or until the Diag LED illuminates red.
12
Содержание WL1133
Страница 1: ......
