Sitecom WL-350 Скачать руководство пользователя страница 6

Страница: 6 / 74

Package Contents

Open the package carefully, and make sure that none of the items listed below
are missing. Do not discard the packing materials; in case of return, the device
must be shipped in its original package.

One WL-350 Wireless Media Router

One 12V/1.25A Power Adapter

UTP Cable

One CD-ROM with User’s Manual

One Quick Installation Guide

Warranty Card

Safety Guidelines

In order to reduce the risk of fire, electric shock and injury, please adhere to the
following safety guidelines.

Carefully follow the instructions in this manual; also follow all instruction
labels on the device.

Except for the power adapter supplied, the device should not be
connected to any other adapters.

Do not spill liquid of any kind on the device.

Do not place the device on an unstable stand or table. The device may
drop and become damaged.

Do not expose the device to direct sunlight.

Do not place any hot devices close to this device, as they may degrade
or cause damage to the device.

Do not place any heavy objects on top of the device.

Do not use liquid cleaners or aerosol cleaners. Use a soft dry cloth for
cleaning.

Содержание WL-350











































































Результаты поиска

Содержание WL-350

Отзывы:

Sitecom WL-350, Полное руководство, Страница: 6 / 74

Результаты поиска

Содержание WL-350

Отзывы: