Sitecom WL-350, Полное руководство, Страница: 39 / 74

PPTP (Point-to-Point Tunneling Protocol)
The WAN interface can be configured as PPTP. PPTP (Point to Point Tunneling
Protocol) uses a virtual private network to connect to your ISP. This method of
connection is primarily used in Europe. This method of connection requires you to
enter a username and password (provided by your ISP) to gain access to the
Internet. The supported authentication protocols are PAP and CHAP.
Select the
PPTP from the My Internet Connection drop-down list.
Address Mode : PPTP can be used with a dynamic or static IP address. If you
select the Dynamic IP radio button, then the IIP address in the next field is
not required. However, if you select the Static IP radio button, then the IP
address in the next field is required.
PPTP Address : Specify the IP address
PPTP Subnet Mask : Specify the subnet mask for the IP address.
PPTP Gateway IP Address : Specify the IP address of the PPTP gateway.
PPTP Server IP Address : If the PPTP Server’s IP address is different from
the default gateway, then you may specify it here.
User Name : Specify the user name which is provided by your ISP.
Password: Specify the password which is provided by your ISP, and then
verify it once again in the next field.
Reconnect Mode : Select a reconnection time:
o
Always on : A connection to the Internet is always maintained.
o
On demand : A connection to the Internet is made as needed.