Sitecom KAMULTSSVDA Скачать руководство пользователя страница 47

Страница: 47 / 65

Please check

www.sitecom.com

for up to date drivers & utilities, manuals and support

Popular applications

This section lists the more popular applications that require

multiple connections. Select an application from the Popular

Applications selection. Once you have selected an application,

select a location (1-10) in the

Copy to

selection box and then click

the

Copy to

button. This will automatically list the Public Ports

required for this popular application in the location (1-10) you’d

specified.

Add Special Application Fill in the "Trigger Port", "Trigger Type”, “Public Port”, "Public Type",

"Public Port" and "Comment" of the setting to be added and then

click "Add". Then this Special Application setting will be added into

the "Current Trigger-Port Table" below. If you find any typo before

adding it and want to retype again, just click "Clear" and the fields

will be cleared.

Remove

If you want to remove some Special Application settings from the

“Current Trigger-Port Table", select the Special Application settings

you want to remove in the table and then click "Delete Selected". If

you want remove all Special Application settings from the table,

just click "Delete All" button. Click "Reset" will clear your current

selections.

Example: Special Applications

If you need to run applications that require multiple connections, then specify the port

(outbound) normally associated with that application in the "Trigger Port" field. Then select

the protocol type (TCP or UDP) and enter the public ports associated with the trigger port to

open them up for inbound traffic.

Example:

Trigger

Port

Trigger

Type

Public Port

Public Type

Comment

28800

UDP

2300-2400, 47624

TCP

MSN Game Zone

6112

UDP

6112

UDP

Battle.net

In the example above, when a user trigger’s port 28800 (outbound) for MSN Game Zone then

the router will allow incoming packets for ports 2300-2400 and 47624 to be directed to that

user.

Note

: Only one LAN client can use a particular special application at a time.

Содержание KAMULTSSVDA


































































Результаты поиска

Содержание KAMULTSSVDA

Отзывы:

Бренды по названию

Популярные бренды

Sitecom KAMULTSSVDA, Руководство пользователя

Результаты поиска

Содержание KAMULTSSVDA

Отзывы:

Бренды по названию

Популярные бренды