Sitecom DC-227, Полное руководство

Страница: 46 / 61

Sitecom ADSL2+ Modem DC-227
46
required if the source port or destination port has been entered.
Source Port The source port of the selected protocol. You cannot configure this field
without entering the protocol first.
Destination Port The destination port of the selected protocol. You cannot configure this
field without entering the protocol first.
Physical Port The incoming ports. The selections include LAN ports, wireless port, and
the blank for not applicable.
Field Description
Outbound Priority The priority level for the traffic that matches this classification rule. The
possible selections are (in the descending priority): p0, p1, p2, p3.
IP Precedence Select this field to mark the IP precedence bits in the packet that match
this classification rule.
IP Type of Service Select this field to mark the IP TOS bits in the packet that match this
classification rule.
802.1p Select this field to mark the 3-bit user-priority field in the 802.1p
header of the packet that match this classification rule. Note that this
802.1p marking is workable on a given PVC channel only if the VLAN tag
is enabled in this PVC channel.