Field Reference Guide
SITECH TECHNOLOGY DEALER
GCS900 Vertical Guidance
Version:
13.1
1.
Press
“Menu”
2.
Press
“Guidance Method”
and Press
“OK”
3.
Change
Adjust cut to avoid overcut:
to
“NO”
4.
Press
“F1”
for
Change Method
5.
Select
Method
from list and Press
“OK”
6.
Press
“OK”
to accept change
7.
Press
“ESC”
to return to operating screen
1)
One Point Center
is the default setting
used for long or wide surfaces. It also
allows for shaping crowns by holding the
slope past the crown- point.
One Point Focus
is used for narrow
surfaces such as shoulders or slopes.
Page 12