SITE DRAINER SD 1500T, Инструкция по эксплуатации

Страница: 15 / 16

TROUBLESHOOTING
Problems Possible Causes Solutions
Pump fails to start No electricity > Check power source
Open circuit or poor connection > Check if there is an open circuit
Impeller is clogged >
Inspect the impeller
Pump starts but stops Impeller is clogged > Inspect the impeller
immediately Motor abnormal > Repair the motor or replace
causing the motor The pump is picking up too much Place the pump on a concrete
protector to activate sediment > surface to prevent sediment
pickup
The pump's head and Impeller is worn > Replace impeller
pumping volume Hose may be clogged > Unclog hose, reduce # of bends
is low
Pump makes a noise Motor bearings may be worn > Replace bearings
or vibrates
T H E N O N - C L O G G I N G S O L U T I O N
T M
15