PUMP INSTALLATION
Before installation, check you local electrical and plumbing regulations. These
regulations are for your safety
Use the pump dimensional drawing to ensure proper installation
Make sure the cables are not kinked or nipped
Ensure that hoses and valves are suitable for the pressure of the pump. Place the
pump on a flat base and make sure it cannot fall over or sink
Make sure that the pump cannot rotate at the startup or during operation
Should there be any problems that occur during installation, please contact a Site
Drainer representative
DO NOT dismantle the product before/during installation without any authorized
instructions from Site Drainer
T H E N O N - C L O G G I N G S O L U T I O N
T M
12
