AG 02 V4
29 / 80
Seite / Page 29
Step 2
Push the two cover caps (48) onto the nuts (15). Slide the protective covers (37), as shown, on
each side of the base and pull them down until the bottom edges of the covers are positioned just
below the left and right folding arms (8L, 8R). Close the Velcro(R) strips on the underside of the
protective covers (37) so that the covers are fastened to the left and right folding arms (8L, 8R).
The covers are correctly fitted if the left and right folding arms (8L, 8R) are completely inside the
protective covers (37). The logo will be on the outside.
