Flight Simulators Solutions
737
2.2
737NG CLOCK/CHRONO
User Manual
FS737NG-MAN-GAU-CT-E-18-0172
6 / 14
User Manual - 737NG Clock V3.5 - Rev2.2.docx
6.1
TIME/DATE FUNCTION
The TIME/DATE push button controls the different modes the clock can be switched to. The TIME/DATE
function has 4 modes of operation.
All the relating information to TIME/DATE appears in the top display.
UTC TIME:
This information is extracted in the real plane from the GPS(GLOBAL POSITIONING
SYSTEM) but as this unit is a Stand-Alone module, the UTC hour must be set manually and saved in
a memory for its posterior use. Once the UTC hour is set, it will not be necessary to re-establish it
until the battery of lithium is exhausted.
UTC DATE:
this information is extracted in the real plane from the GPS(GLOBAL POSITIONING
SYSTEM) but as this unit is a Stand-Alone module, the UTC date must be set manually and saved in
a memory for its posterior use. Once the UTC date is set, it will not be necessary to re-establish it
until the battery of lithium runs out.
MAN TIME:
this information is extracted in the real plane from the clock but as this unit is a Stand-
Alone module, the MAN hour (local time) must be set manually and saved in a memory for its
posterior use. The MAN hour must be set according to the geographic zone where the clock is going
to be used. Once the MAN hour is set, it will not be necessary to re-establish it until the battery of
lithium is dead.
MAN DATE:
this information is extracted in the real plane from the clock but as this unit is a Stand-
Alone, the MAN date (local date) must be set manually and saved in a memory for its posterior use.
The MAN date must be set according to the geographic zone where the clock is going to be used.
Once the MAN date is set, it will not be necessary to re-establish it until the battery of lithium
needs to be replaced.
