Siselectron SWM3530 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 57

Siselectron SWM3530 Скачать руководство пользователя страница 33

2.4 GHz/5 GHz SSID Profiles

Current Profile: You can configure up to sixteen (16) different

SSIDs  (eight    (8)   per   band).   If   multiple    client devices   will be
accessing the  network,  you  can  arrange the devices  into  SSID groups.
Click Edit  to configure the  profile and  check  whether you  wish  to
enable extra  SSIDs.

SSID: Specifies the SSID for the current profile.

Suppressed SSID: Check this option to hide a SSID from clients. If
checked, the SSID will not appear in the site survey.

Station Separation: Check the box to allow or prevent
communication between client devices.

VID:  Specifies    the  VLAN  tag  for  each  profile.  If your  netowrk  includes
VLANs,  you  can  specify    a  VLAN  ID for  packets  to  pass  through the
Access  Point  with  a tag.

Wireless Security: See the Wireless Security section on page 42.

Save: Click Save to accept the changes.

Isolation: Check the box to

restrict clients

from communicating

with

different VIDs.

31

«
...
31
32
33
34
35
...
»

Содержание SWM3530


























































Отзывы:

Нет отзывов