Siselectron SWM3530 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 57

Siselectron SWM3530 Скачать руководство пользователя страница 12

P

Hardware Installation

1. Connect one end of the Ethernet cable into the main LAN port

(PoE) of the Access Point and the other end to the AP Ethernet
port on the PoE injector.

2. Connect the Power Adapter to the DC-IN port of the PoE

injector and plug the other end in to an electrical outlet.

4. Screw on the provided antennas to the device. Once both

connections are secure, verify the following:

a) Ensure that the POWER light is on (it will be green).

oE Injector/

PoE Swtich

b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will be green

for both 5 GHz and 2.4 GHz).

c) Ensure that the LAN (Computer/SWM 3530

Connection) light is on (it will be green).

Ethernet

Power

Outlet

Computer

d) Once all three lights are on, proceed to set up the

Access Point using the computer.

Note: The Access Point supports both IEEE 802.3at PoE (Power over Ethernet)

or the included power injector. You may use either one as the power source.

Do NOT use both at the same time.

This

diagram depicts

the hardware configuration.

3. Connect the second Ethernet cable into the LAN port of the PoE

injector and the other end to the Ethernet port on the

computer.

10

«
...
10
11
12
13
14
...
»

Содержание SWM3530


























































Отзывы:

Нет отзывов