Sirus TX 1000, Руководство пользователя, Страница: 7 / 9

7 / 9
33. 5/L Speaker Out-This is a signal output for the speakers with bridged way, the Minimax impedance
can be 4 ohm,
with short-circuit protection.
34. 4/R TRS Out-this is a balanced signal output for TRS in RIGHT channel
35. 3/L TRS Out-this is a balanced signal output for TRS in LEFT channel
36. 1/L Insert-This 1/4" TRS jack are configured to connect an analog outboard effect for LEFT
channel(the selctor switch 1 mustturn to MIC position), inserting the effect
between the preamp and the A/D converter . The TRS Jack is configured as follows:
Tip=Send,Ring=Return,
Sleeve=Ground.
37. 1/L Insert-This 1/4" TRS jack are configured to connect an analog outboard effect for RIGHT
channel(the selector switch 1 must turn to MIC position), inserting the
effect between the preamp and the A/D converter . The TRS Jack is configured as follows:
Tip=Send,Ring=Return,Sleeve=Ground.
Brief Features: in addition to the multiple functions and flexible configurations, this item is with the
ASIO driver itself.
Method of installing the driver under USB2.0 HI: Firstly please turn the switch to FULL position,
connect the USB cable and turn on the power. When the signal light 17 is illuminated, please firstly
play some music and check if it can work properly. If it can work properly, then please find the driver
which is corresponding to your system from the attached DISC, then operate according to the
instructions.