Sirus TX 1000, Руководство пользователя, Страница: 4 / 9

4 / 9
2. Front View
1. MIC/LINE-This button selects the mode of signal input for one channel(4).In the out position, the
inputs are set to accept the mic signal. In the in position, the inputs are set to accept line input.
2. Input Gain Level Knob(GAIN)-this knob can adjust the input gain level of one channel (4).
3. Clip Indicator LED(CLIP)-The Clip LED will illuminate red when the input signal from one channel(4)
is big enough.
4. 1/L MIC/LINE-This connector is a combo connector for mic input or line input. When the button of
MIC/LINE (1) in the out position, the connector can accept any microphone signal in standard 3p
balanced XLR or high impendance instrument level signal on an unbalanced ¼” TRS Plug with lower
input. When the button is in the in position, the connector can accept any line signal on a standard 3p
balanced XLR (Note the gain cant be too big) or high impedance instrument level signal on an
unbalanced ¼” TRS plug with high input.
5. 48V-It is an indicator for 48v phantom power . When the switch(25) is on, the light will be
illuminated.
6. 12V DC-When the power(22) is connected, the power switch(20) is on, the light will be illuminated.
7. 2/R MIC/LINE-This connector is a combo connector for mic input or line input. When the button of
MIC/LINE (1) in the out position, the connector can accept any microphone signal in standard 3p
balanced XLR or high impendance instrument level signal on an unbalanced ¼” TRS Plug with lower
input. When the button is in the in position, the connector can accept any line signal on a standard 3p
balanced XLR (Note the gain cant be too big) or high impedance instrument level signal on an
unbalanced ¼” TRS plug with high input.
8. Clip Indicator LED(CLIP)-The Clip LED will illuminate red when the input signal or PC USB from one
channel(7) is big enough.
9. Input Gain Level Knob(GAIN)-this knob can adjust the input gain level of one channel(7).