5 / 8
3. Introduction
Thank you for buying the CXS-4000.
It is a powerful device.
For a successful installation and operation, please read this manual carefully.
4. Control
4.1. Back view
1. Power connector
To connect with the mains. Cable is included. Please pay attention to the correct mains voltage. A small
switch next to the power connector is compatible between 100 and 230 V. In Germany the switch must
be set to 230 V!
2. Balanced output stereo right
Here you can plug in a XLR cable to lead the audio signal stereo right to an amp or a mixer.
3. Balanced output stereo left
Here you can plug in a XLR cable to lead the audio signal stereo left to an amp or a mixer.
4. Volume control for the right XLR out
With this button you can adjust the volume of the output.
5. Volume control for the left XLR out
With this button you can adjust the volume of the output.
6. Analogue audio output
This L/R outputs are unbalanced jack outputs for your audio signal.
7. 6,3mm jack for headphones
Pre-listening.
8. Volume control for headphones
With this button you can adjust the volume of the headphones.
