- 12 -
THREADING UPPER THREAD
Turn the hand wheel toward you to raise the needle to its highest position.
Raise the presser foot.
1. Pull the thread under the thread guide and slide it up over the hook.
2. Puts in among two iron sheets.
3. Guide the thread down the right side slot and up the left side slot.
4. Firmly pull the thread from right to left, over the take-up lever and down into the take-up lever eye.
5. Puts in inside the wire.
6. Slide the thread to the left behind the needle bar thread guide.
7. Thread the needle from front to back.
Pass the thread from front to rear through needle and pull approx. 10 cm of thread through eye of needle.
(For Auto threaded system see page 13)
1
2
3
4
5
6
7
