SIRS NAVIGATION LTD
COMPONENT MAINTENANCE MANUAL
C. Bellows. (10)
If the depth of the bellows is less than 8.9mm (0.35”), extend the dimension
by running a suitably tapered piece of peg wood round the outer convolutions.
If the dimension is greater, gently compress the assembly until the correct
dimension is achieved.
If the bellows component is defective, it must be replaced.
D.
Surface
Finish.
CAUTION:
DO NOT USE SOLVENTS ON PLASTIC COMPONENTS.
DO
NOT
EXPOSE
THE COMPASS TO TEMPERATURES
HIGHER
THAN
85
°
C.
E. Compass Bowl. (180)
Paint where necessary with the specified paint and air dry for a time of 12 hours.
If the white ‘lubber line’ is not clearly seen, replace the bowl (180).
PAGE 6002
APR 10/03
34-25-21
The document reference is online, please check the correspondence between the online documentation and the printed version.
