Sirius XM RAdio Stratus7, Руководство пользователя

Страница: 31 / 80

31
blunt plastic putty knife or similar blunt tool to lift the plastic trim
just enough to tuck the cable under underneath . Avoid side airbag
locations on back pillars and above the doors . Airbag locations are
marked with “SRS” logos . Be careful not to crimp or cut the cable .
3. Bring the cable out from the trim near the front of the cabin and
route it under the carpet toward the dashboard or console . Coil any
excess cable in a hidden location, such as under the carpet, keeping
it away from any vehicle pedals or controls . Secure the excess cable
with wire ties (purchased separately) .
4. Bring the end of the cable out at the Power Connect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock .
5. Continue with “Step 5: Connect the Magnetic Mount Antenna and
Power Connect Power Adapter” on page 34 .
Convertible:
1. Bring the antenna cable from the antenna into the trunk at the front
edge of the trunk lid . Keep any bends in the cable loose . Tape or tie
the cable along the inside of the
trunk lid to the trunk lid hinge strut .
2. Allow enough slack in the cable so
the trunk lid can easily open and
close and keep the cable away from
hinges, gears, etc ., that could crimp
or cut it . Route the cable along the
trunk wall and into the cabin through
a conduit or along an existing wiring
harness .
Vehicle Installation