12
Installation
Mono Audio Cable . Connect the Stereo
Audio cable to the
Audio Out (L) (R)
(white
and red) connectors, or the Mono Audio
Cable to the
Mono Out
connector (green) .
6 .
Set the
Impedance Switch
to the correct
impedance for your audio system . Most devices use the 8 ohms
setting, but some IP based phone systems may require the 600 ohm
setting .
Step 3: Enter Your SiriusXM Credentials
1 .
From the Main Screen, turn the
Scroll knob
to the right to highlight
Settings
and press the knob to select .
2 .
Turn the
Scroll knob
to highlight
Credentials
and press the knob .
3 .
First enter the username that SiriusXM provided to you . The username
is case sensitive . Turn the
Scroll knob
right and left to select a letter
or number and press the knob to select the letter . If you make a
mistake, press the
BACK
button to erase the last entry .
4 .
Continue until you have finished entering the username . Then turn the
Scroll knob
until
END
is displayed and press the knob .
5 .
The Radio will display
LOADING . . .
while
the username is being verified .
Username
updated
will be briefly displayed if you
entered the correct username . If you have
entered an incorrect username,
Username
does not exist
will be displayed . You will
need to correct the username .
6 .
Next you will be prompted to enter your
password . Enter your password in the
Enter Username
~ CNL END <AaB
ABCDEF
12:00 AM
Loading...
|
12:00 AM
<Category List >
Settings
12:00 AM
Содержание SiriusXM Music
Страница 2: ......