24
Onyx EZR with Vehicle Kit User Guide
You can follow either the general activation and subscription process or use the on-board activation
guide to activate your Onyx EZR and subscribe to the XM service .
General activation and subscription process:
Subscribe to the XM service by following these steps:
1.
Make sure your Onyx EZR is turned on, tuned to XM Preview channel 1, and receiving the XM
signal so that you can hear the XM audio .
2.
Make a note of the XM Radio ID . You can find it:
•
by selecting
Radio ID
in menu items
•
on channel 0 (zero)
•
on a label on the bottom of the gift box
•
on the label on the back of your Onyx Plus
NOTE!
The XM Radio ID does not use the letters I, O, S, or F .
3.
To subscribe:
•
Online: Go to
www .siriusxm .com/activatenow
to access or set up an online account, subscribe
to the service, and activate your Radio .
OR
•
By phone: Call
1-866-635-2349
.
Activation usually takes 10 to 15 minutes after you have completed the subscription process, but may
take up to an hour . We recommend that your Radio remain on until subscribed . Once subscribed, the
Radio will receive and you can tune to channels in your subscription plan .
Press
up
or
down
to tune to other channels, and
left
or
right
to browse the different
categories of channels . Learn what all the buttons do by turning to “Navigation Basics” on page
26 .
Activation guide:
For your convenience, Onyx EZR has an on-board activation guide . You can activate your radio and
subscribe to the XM service by using this guide, where you will be guided step-by-step through the
subscription process . To access and use the guide, simply follow these steps:
1.
Turn Onyx EZR on and press the
Menu button
.
2.
Activate Radio
will be highlighted . Press the
Select button
.
3.
Follow the directions on each successive screen until you complete the
subscription process .
*The phone number show above may
differ from the one shown on your
Onyx EZR . All numbers are valid .
1
866-635-2349
siriusxm.com
XM Preview
Menu
Activate Radio
Radio ID
FM Settings
Jump Settings
Display Settings
Feature Settings
Activation