18
Onyx EZR with Vehicle Kit User Guide
2.
Continue tucking the cable underneath the windshield molding around the windshield to the
lowest corner .
3.
At the lowest corner of the windshield, route the cable out of the windshield molding and into the
rubber weather stripping around the door opening . Lift the weather stripping from the opening
and tuck the cable inside it, then replace the weather stripping . Run the cable inside of the
weather stripping to the bottom of the door opening .
4.
Pull the cable out of the weather stripping at the bottom of the door opening and route it under
the carpet toward the dashboard . Coil any excess cable in a hidden location, such as under the
carpet, keeping it away from any vehicle pedals or controls . Secure the
excess cable with wire ties .
5.
Bring the end of the cable out at the
Power
Connect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it to the
antenna connector of the dock .
6.
Continue with “Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter” on page 18 .
Step 5: Connect the Magnetic Mount Antenna and
Power
Connect
Power Adapter
1.
Plug the Magnetic Mount Antenna into the
silver ANT
connector on the
Power
Connect Vehicle Dock .
2.
Insert the
Power
Connect Power Adapter into your vehicle’s cigarette lighter
or power adapter socket .
3.
Plug the
Power
Connect Power Adapter into the
red
PWR
connector on
the dock .
AUDIO
ANT
PWR
FM
AUDIO
ANT
PWR
FM
Installation