Sirius Satellite Radio SL913, Инструкция по эксплуатации, Страница: 18 / 22

14
Square lamps (SL914)
To replace the bulbs in the square lights,
press the light frame where it says “PUSH”(Fig.
10 and Fig. 11), then replace the bulb and
press the frame back into place.
To replace the LED bar SL913. Remove the
grease filter and put pressure on the led bar
placed in the internal part of the built-in
hood until you can unhook the springs, then
disconnect the connector and replace the bar
with a similar one (Fig.12).
* Warning! To take down the appliance from
the cabinet, remove the definitive fixing
screws (fig. 6) using a screw-driver, get off
the grease filters (fig.3B) and the active car-
bon filters, if they are inserted (fig. 7A). Act
on the small handle of the springs, which are
inside the built-in unit, with the necessary
strength to unhook the appliance from the
cabinet.
* If the supply cord is damaged, it must be
replaced by the manufacturer or its sevice
agent or a similarly qualified person in order
to avoid a hazard.