Sirius Satellite Radio SL913, Инструкция по эксплуатации

Страница: 16 / 22

12
INSTALLATION
Only for the SL913 model, in order to ease
the installation of the product inside the ca-
binet, it is recommended to remove the glass,
unscrewing the four M3x10 screws as shown
in Fig.6.
* Before installing the appliance, in order not
to damage the appliance itself, the metal gra-
se filter should be removed. Such filter can be
removed by pushing the special filter handle
toward the back side of the cooker hood and
turning it downwards so to unfasten it from
its slot (Fig.3).
Essential precautions to respect before in-
stalling the appliance are the following:
To have made a cut-out on the bottom of the
cabinet which is suitable to hold the applian-
ce in position (fig.4).
* prepare the power supply.
* prepare a hole for the exhaust of the air
both in the filtering and in the exhauting ver-
sion.
To install the appliance, adjust the position
of the stop side-springs using the appropria-
te screws (fig.5), according to the thickness
of the board previously drilled, on which the
appliance will be fixed.
Insert the built-in unit in the hole made in
the cabinet until the stop click of the side-
springs is heard and the built-in unit is blo-
cked (fig.7).
Insert the screws provided in the holes inside
the appliance (fig.7A) to block it completely.
Blocking of the stop valve
Warning!
Before connecting the flexible exhausting
pipe to the motor, make sure the stop valve,
which is on the air outlet of the motor, can
swing.
Exausting version
Connect the flange to the exhausting hole
with an appropriate pipe. Connect the ap-
pliance with the electrical mains through the
supply cord.
Filtering version
Connect the flange with a pipe suitable to
convey the air to the top of the cabinet. Con-
nect the appliance with the electrical mains
through the supply cord.
* In its sucking version (Fig.2), fumes are di-
rectly conveyed outside, through an evacua-
tion duct connected with the superior part of
the wall or the ceiling. Both coal filter and air
deflector are not necessary in this case.