SIR-ALP10T Operation and Installation Guide
SC-H1 SIRIUS Connect Tuner Installation Guide
Installation
It is recommended that prior to starting
the installation, you read this installation
section completely and follow the
instructions. In addition, consult the manual
of the audio device to which you will be
connecting the SC-H1 Tuner to determine
the required installation configuration:
• If power for the SC-H1 Tuner is not
provided by your audio device via the
DIN cable connection, you will need to
use the provided AC Power Adapter to
provide power for the SC-H1 Tuner.
• If audio input from the SC-H1 Tuner
is not suported via the DIN cable
connection of your audio device,
you will need to connect the audio
output of the SC-H1 Tuner to your
audio system via the RCA-type or
Optical audio output connectors of the
tuner. (You will need to purchase the
appropriate cable separately.)
Mounting the SC-H1 Tuner
Consider the mounting location carefully to
be sure that you avoid the following:
• Any location where the tuner is
exposed to moisture.
• Any location where the tuner is
exposed to extreme heat.
The tuner may be mounted on a wall
with #10 screws, using the slots on the
underside of the tuner to hang on the tuner
on the screws. Alternately, the tuner may
placed on any flat surface.
Installing the Antenna
Proper installation of the windowsill
antenna is important for consistent satellite
signal reception.
For correct operation and best reception of
the SIRIUS signal, it is important that the
1
2
3
4
5
HORIZON
SKY
SOUTH
WEST
EAST
NORTH
SCREW
MOUNTING SLOTS
