Sirius Satellite Radio 9351116005061, Руководство по установке

Страница: 7 / 12

7
• Accurate maintenance guarantees good
functioning and long-lasting performance.
• Particular care is due to the grease filter panel. It
can be removed by pushing its handle toward the
back side of the rangehood and pulling the filter
downwards so to unfasten it from its slot (Fig.3).
To insert the filter just perform the opposite
operation.
• After 30 hours of operation, the button control
panel will flash, signaling the filters are due for
cleaning. Press the timer button to reset.
The grease filter needs cleaning by regular
handwashing or in dishwashers every two
months at least, depending on its use.
Filters may require cleaning sooner if
frequent heavy frying is done.
• To clean the appliance itself, water and detergent
are recommended, while abrasive products
should be avoided. For steel appliances
specialized detergents are recommended (please
follow the instructions indicated on the product
itself to obtain the desired results).
MAINTENANCE
SL906-DL series
A: Light switch on/off
B: Motor switch on speed 1/off - (low/simmer)
C: Motor switch on speed 2 - (general cooking)
D: Motor switch on speed 3 - (high power)
E: Motor switch on speed 4 - (booster)
F: 10 minute shut-off timer
OPERATION
(Fig.8)
DIMMABLE LIGHT FUNCTION
This function provides for lights dimmability, ranging
from 20% to 100%, by holding down light key on the
remote control or rangehood buttons.
Functions are the following:
- rangehood light off- shortly press the key - light on
at 100%
- light on at 100% - shortly press the key - light off
- light on at 100% - hold down the light button
to reduce brightness.
- releasing the key during reduction, or increase -
light keeps the luminous intensity reached.
- Light on - dimmed - hold down the light button to
increase brightness.
COLOUR TEMPERATURE SETTING (KELVIN)
Make sure that the lights and the fan are off. Holding
down the TIMER key will turn on the light at the
previously set colour temperature.
Press the TIMER key again. As long as the key
is kept pressed, the colour temperature is changed
from warm to cool, just leave the light key to select
the desired colour. Exit the colour temperature
selection function by pressing the ON/OFF key.