001118v4.0 - US EN
Sirius Medical Systems
Sirius Pintuition Detector
Instructions for Use
12/32
3
I
NSTALLATION AND
B
ASIC
O
PERATION OF THE
P
INTUITION
D
ETECTOR
3.1
U
NPACKING AND
I
NSPECTING
The following items are included in the Pintuition Base Unit packaging:
•
Pintuition Base Unit (SPBU)
•
Power cord
•
Instructions for Use (
this document
)
The following items are included in the Pintuition Probe storage case:
•
Pintuition Probe
•
Pintuition Test Kit
•
Instructions for Use (
this document
)
Carefully inspect each item as it is unpacked for any signs of damage that may have occurred
during shipment.
Do not attempt to set up the Pintuition Detector if anything is damaged or defective.
It is recommended to clean and disinfect the Probe before first use according to the
instructions in Section 5 (Reprocessing
Contact Sirius Medical Systems if anything is damaged or defective.
3.2
D
EVICE
D
ESCRIPTION
3.2.1
P
INTUITION
B
ASE
U
NIT
-
F
RONT
Figure 1: Pintuition Base Unit - Front
ID
Item
Description
1
Pintuition Base Unit
The device
2
Display
To provide feedback to the user. Indication of errors
and version of software
3
Volume control knob
To control volume, see Section 4.4 (Adjusting the
volume)
4
Calibration button
To start calibration, see Section 4.2 (Calibrating the
Pintuition Detector)
5
Connector port
To connect Pintuition Probe, see Section 4.1
(Connecting the Pintuition Probe)
