Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014
7
ASSEMBLY INSTRUCTION
This manual is designed to help you easily assemble, adjust and use this machine. Please read this
manual carefully. For the sake of familiarizing yourself with the parts identified in the instruction, first study
the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list for help to
identify the parts.
It will take two people to assemble your unit.
Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid
damaging parts, do not use power tools for assembly.
STEP 1
Attach the front stabilizer (14) to the main frame (1), securing with two carriage bolts (13), two curved
washers (9) and two domed nuts (19).
1
9
1 3
1 4
1 9
STEP 2
Attach rear stabilizer (27) to rear support tube (23), securing with two carriage bolts (13), two curved
washers (9) and two domed nuts (19).
Attach leveling pad (20) to main frame (1)
Tips: If the unit is wobbly, please adjust the leveling pad (20). See page 14.
Connect middle extension hand pulse wire (31) and rear extension hand pulse wire (32). Loosen the
quick release knob (24) and insert rear support tube (23) into main frame (1). Then retighten the
quick release knob (24).
1
2 4
2 0
3 1
9
1 3
1 9
2 3
2 7
3 2
