Italy 100 cutter
Use and Maintenance Manual Ver. 1.1
15
•
The machine connections (and any accessory devices) must be earthed for
electrostatic discharge.
•
It is strictly prohibited to operate on any part of the machine before it has come
to a complete halt and only after pulling the plug from the power socket. Only
following this operation may the mechanics and workers carry out maintenance
or repair procedures.
•
Do not deactivate the safety devices or ignore the warnings and alarms, be they
automatically communicated or given on labels fixed on the machine.
•
Do not operate the machine when the guards have been removed.
4.5
W
ARNINGS ON USE
The cutter must be used only for the intended use declared by the manufacturer.
In
particular, it is prohibited to use the cutter, even partially, in one of the
following conditions
:
•
With the guards removed and/or with the safety devices deactivated, faulty or
missing
•
If the cutter has not properly been installed
•
In explosive atmospheres or in places where there is a risk of fire
•
In dangerous conditions or when the cutter is malfunctioning
•
Improper use of the cutter by untrained personnel
•
Use not in compliance with the specific regulations
•
In the event of power supply defects
•
After unauthorised modifications or operations
•
Total or partial inobservance of the instructions
•
With materials and tools different from those specified by the manufacturer.
The machine is not intended for use in one or more of the following conditions:
•
Environments with an average temperature higher than +35°C in a period of 24
hours
•
Environments with relative humidity higher than 95%
•
At altitudes of over 3000 m above sea level.
If finding potentially dangerous situations for the operator during machine
use, the employer is obliged to immediately inform SIRI S.r.l. thereof in
writing.
IMPORTANT
Any deviation or departure from the above mentioned rules requires a specific
written declaration by SIRI S.r.l. Any modification not authorised by the
manufacturer which alters the machine functions affecting the risks and/or
generating additional risks, shall be the sole responsibility of the person who
made the said modifications. Modifications made without the manufacturer’s
authorisation shall lead to forfeiture of the warranty and invalidate the
declaration of conformity issued in accordance with Machine Directive
2006/42/CE.
