Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
+44(0)118 976 9000
55
Figure 45.
VRRP settings
Virtual Router Redundancy Protocol. Settings to switch routing path to different
routers. The VRRP works in non pre-emptive mode where the router configured as
the master will operate as the master regardless of whether it has the highest priority,
until such time that it fails.
VRRP
Setting
Options
Enable VRRP
Check to enable
Mode
Choose master or backup
Virtual IP
Choose the virtual gateway IP address of the virtual router.
This must be an unused IP address of the subnet used by
the VRRP. It may be the address of one of the routers.
Virtual Router ID
Enter an ID for the router (must be unique for each router in
the network)
Priority
Set router priority. The highest priority router will be the
active one. By default, use 100; the MAC address owner
should use 255.
Authentication
Check to enable
Password
Enter password (required if authentication enabled)
Table 35.
VRRP settings
55
