Sircle SircleBind CW-4500, Брошюра и характеристики

Страница: 5 / 7

5
Bind:
1. Use the wire diameter guide to determine the appropri-
ate size wire to be used for your document. It can also
be determined using the following table.
Note: The
standard is 20lb paper.
2. Place wire open side up on the wire hanger.(See Fig.
5.1)
3. Thread pages onto the wire hanger.
4. Lift the wire closing handle so it is in the vertical or up-
right position.
5. Place the document in the wire throat so that the side to
be bound enters first. (See Fig. 5.2)
6. Hold the document steady and pull down on the wire
closing handle to bind the document. (See Fig. 5.3)
7. Remove the bound document.
Binding Comb 5 6 8 10 11 12 14 16 19 22 25 28
Max. # of Sheets 30 45 85 100 115 135 155 185 215 245 275 320
3:1 Wire
Punch:
1. Lift the support tray up.
2. Use the paper margin guide to properly align papers.
Tip: To ensure proper alignment, use a piece of scrap
paper to test the punch and adjust if necessary. (See Fig.
4.1)
3. Insert the document to be punched in the 3:1 wire throat.
(See Fig. 4.2)
4. Move the punch switch to the left.
5. Remove punched document.
Fig. 4.2 Fig. 4.1
Fig. 5.2
Fig. 5.1
Fig. 5.3