1,
Gooseneck with recessed (left) and exposed (right) cabling
Items needed
● Dome camera
● Gooseneck tube and other equipped items (optional accessory)
● Waterproof boot (standard accessory with the indoor tube adapter)
● Screws and screw anchors (not supplied)
● Indoor tube adapter for the MSD620 (optional accessory)
Tools needed
● Drill
● Screwdriver
To mount the dome with the gooseneck tube
1
Make a cable entry hole in the wall to recess the cables. Otherwise, cables can be
threaded through the cable entry hole on the mount.
2
Thread the cables through the mini wall mount and out through either the cable entry
hole in the wall or the hole in the mini wall mount.
3
Fix the gooseneck tube to the wall with proper screws and screw anchors.
4
Attach the waterproof boot to the gooseneck tube.
5
Thread the cables through the gooseneck tube and the tube adapter and lock it to the
mini wall mount with the supplied screws and washers.
At this point, the dome can be suspended from the mini wall mount using the safety
wire.
6
Block the mount's cable entry hole with the supplied sponge(s) to prevent insects from
entering the tube.
7
Attach the lock screw plate to the back of the dome with supplied screw, as depicted in
the section Ceiling mounting with a straight tube.
8
Adjust the waterproof boot to the junction of the gooseneck tube and the tube adapter.
9
Connect the cables to the dome camera, attach the dome to the indoor tube adapter,
and fasten them together with the supplied screw.
Install the camera
24