Detaching the removable wing from the
flush mount
Attaching the wing to the MSD620
3
Place the red sticker on the ceiling and cut the circle out of the ceiling.
4
Insert the flush mount into the hole.
5
Rotate the flush mount's wings to fix the mount at the edge of the ceiling opening and
tighten their screws.
Positioning the flush mount in the ceiling
6
Thread the cable harness and Ethernet cable through the center hole of the flush mount
and connect them to the dome body.
7
Mount the dome body into the bracket and rotate clockwise.
8
Tighten the fixing screw, as shown in the figure, to secure the dome body.
Securing the dome camera
9
Detach the optical cover, if necessary, and attach the decorative ring to the mount.
10
Reattach the optical cover.
Install the camera
20