© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
82
effect
Accept Last Deact Code
Cancel Accept Last
ActCode
*84
Call Back Act Code
Callback when the last outbound call is not
busy
ActCode *66
Call Back Deact Code
Cancel callback
ActCode
*86
CW_Act_Code
Enable Call Waiting on all calls
ActCode
*56
CW_Deact_Code Disable
Call
Waiting on all calls
ActCode
*57
CW_Per_Call_Act_Code
Enable Call Waiting for the next call
ActCode
*71
CW_Per_Call_Deact_Code Disable
Call
Waiting for the next call
ActCode
*70
Block_CID_Act_Code
Block CID on all outbound calls
ActCode
*67
Block_CID_Deact_Code
Unblock CID on all outbound calls
ActCode
*66
Block_CID_Per_Call_Act_Code
Block CID on the next outbound call
ActCode
*81
Blcok_CID_Per_Call_Deact_Co
de
Unblock CID on the next inbound call
ActCode
*82
Block_ANC_Act_Code
Block all anonymous calls
ActCode
*77
Block_ANC_Deact_Code
Unblock all anonymous calls
ActCode
*87
DND_Act_Code
Enable Do Not Disturb
ActCode
*78
DND_Deact_Code
Disable Do Not Disturb
ActCode
*79
CID_Act_Code
Enable Caller-ID Generation
ActCode
*65
CID_Deact_Code Disable
Call-ID
Generation
ActCode
*85
CWCID_Act_Code
Enable Call Waiting Caller-ID generation
ActCode
*25
CWCID_Deact_Code Disable
Call
Waiting Caller-ID generation
ActCode
*45
Dist_Ring_Act_Code Enable
Distinctive Ringing
ActCode
*61
Dist_Ring_Deact_Code Disable
Distinctive Ringing
ActCode
*81
Speed Dial Act Code
Assign a speed dial number
ActCode
*74
Secure All Call Act Code
Make all outbound calls secure
ActCode
*16
Secure No Call Act Code
Make all outbound calls not secure
ActCode
*17
Secure One Call Act Code
Make the next outbound call secure. This
operation is redundant if all outbound calls
are secure by default.
ActCode *18
Secure One Call Deact Code
Make the next outbound call not secure.
This operation is redundant if all outbound
calls are not secure by default.
ActCode *19
Attn-Xfer Act Code
If the code is specified, then the code must
be entered before dialing the 3rd party
before attn-xfer can be activated.
ActCode
Conference Act Code
If the code is specified, then the code must
be entered before dialing the 3rd party
before conference can be activated.
ActCode
Modem Toggle Line Code
Modem pass through mode can only be
triggered by pre-dialing this code. See
section 7.2.8 for more discussion.
ActCode
Referral Services Codes
One or more *code can be configured into
this parameter, such as *98, or
*97|*98|*123, etc. Max total length is 79
chars. This parameter applies when the
user places the current call on hold (by
Hook Flash) and is listening to 2nd dial
tone. Each *code (and the following valid
target number according to current dial
plan) entered on the 2nd dial-tone triggers
the SPA to perform a blind transfer to a
target number that is prepended by the
Str79
