4
When using your inverter welder, basic safety precautions should always be followed
to reduce the risk of personal injury and / or damage to the inverter welder.
Read all of these instructions before operating the inverter welder and save this user
manual for future reference.
The inverter welder should
not
be modified or used for any application other than that
for which it was designed.
This inverter welder was designed to supply electric current for ARC and TIG welding.
If you are unsure of its relative applications do not hesitate to contact us and we will
be more than happy to advise you.
Before each use of the inverter welder always check no parts are broken and that no
parts are missing.
Always operate the inverter welder safely and correctly.
KNOW YOUR INVERTER WELDER:
Read and understand the owner's manual and labels
affixed to the inverter welder. Learn its applications and limitations, as well as the po-
tential hazards specific to it.
KEEP WORK AREA CLEAN AND WELL LIT:
Cluttered work benches and dark areas invite
accidents. Floors must not be slippery due to oil, water or sawdust etc.
DO NOT USE THE INVERTER WELDER IN DANGEROUS ENVIRONMENTS:
Do not use the
inverter welder in damp or wet locations, or expose it to rain. Provide adequate space
surrounding the work area. Do not use in environments with a potentially explosive at-
mosphere.
KEEP CHILDREN AND UNTRAINED PERSONNEL AWAY FROM THE WORK AREA:
All visitors
SAFETY SYMBOLS USED THROUGHOUT THIS MANUAL
SAFETY INSTRUCTIONS
Important:
Please read the following instructions carefully,
failure to do
so could lead to serious personal injury and / or damage to the invert-
er welder.
Danger / Caution:
Indicates risk of personal injury and/or the possibility of
damage.
Warning:
Risk of electrical injury or damage!
Note:
Supplementary information.
25
EXPLODED DRAWING / PARTS LIST
T1400 (05705)
Ref. No.
Description
Sip Part No. Ref. No.
Description
Sip Part No.
1.
Handle
WE07-00051
13.
Chassis
WE07-00063
2.
Cover
WE07-00072
14.
Positive Output Busbar
WE07-00076
3.
EMC Board
WE07-00073
15.
Electrolytic Capacitor
WE07-00065
4.
NTC Resistance
WE07-00054
16.
Fan
WE07-00077
5.
Main Control PCB
WE07-00074
17.
Fan Fixing Plate
WE07-00067
6.
Power Transformer
WE07-00056
18.
Plastic Rear Cover
WE07-00068
7.
Main Transformer
WE07-00075
19.
Main On/Off Switch
WE07-00069
8.
Front Plastic Panel
WE07-00058
20.
Mains Lead
WE07-00070
9.
Potentiometer knob
WE07-00059
21.
Earth Lead
c/w
Clamp
WE07-00037
10.
Potentiometer
WE07-00060
22.
Welding cable c/w Electrode Holder
WE07-00036
11.
Dinse Socket
WE07-00061
N/A
Front Cover Sticker
WE07-00078
12.
LED Holder
WE07-00062