8
ASSEMBLY INSTRUCTIONS
F
K
D
Note:
There are only 2 bolts shown
on the picture, but there are 3 bolts
used to secure.
1. Locate the main leg (F) and rear
table (k).
2. Bolt the rear table (k) to the main
leg (F) using the cap head bolts
supplied (D).
BUILDING THE MAIN STAND
9
ASSEMBLY INSTRUCTIONS….cont
F
D
K
Note:
There are only 2 bolts shown
on the picture, but there are 3 bolts
used to secure.
3. Fit the 2nd main leg (F) to the opposite
side, using the same cap head bolts
(D).
I
E
B
F
4. Now fasten the left support leg (I) to the
main leg (F) using bolt (B) and nut (E).
H
E
B
F
5. Repeat step 4 but use the right leg sup-
port (H).
Note:
Do not over-tighten the nut/bolt
as there should be some movement
to allow the support to pivot.
Note:
Do not over-tighten the nut/
bolt as there should be some move-
ment to allow the support to pivot.
