4
SAFETY INSTRUCTIONS
IMPORTANT:
Please read the following instructions carefully,
failure to do so could
lead to serious personal injury and / or damage to the Log splitter.
When using your log splitter, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, personal injury and / or damage to the log split-
ter. Read all these instructions before operating the log splitter and save this user man-
ual for future reference.
SIP
recommends that this log splitter should
not
be modified or used for any applica-
tion other than that for which it was designed. If you are unsure of its relative applica-
tions do not hesitate to contact us and we will be more than happy to advise you.
KNOW YOUR LOG SPLITTER:
Read and understand the owner's manual and labels af-
fixed to the log splitter. Learn its applications and limitations, as well as the potential
hazards specific to it.
DO NOT USE THE LOG SPLITTER IN DANGEROUS ENVIRONMENTS:
Do not use your log
splitter in damp or wet locations, or expose it to rain / water. Always provide adequate
space around the log splitter.
KEEP CHILDREN AND UNTRAINED PERSONNEL AWAY FROM THE WORK AREA:
All visitors
should be kept at a safe distance from the work area.
STAY ALERT:
Always watch what you are doing and use common sense.
DISCONNECT THE LOG SPLITTER FROM THE MAINS SUPPLY:
When not in use.
DO NOT ABUSE THE MAINS LEAD:
Never pull the mains lead it to remove the plug from
the mains socket. Keep the mains lead away from heat, oil and sharp edges. If the
mains lead is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid unwanted hazards.
HAVE YOUR LOG SPLITTER REPAIRED BY A QUALIFIED PERSON:
The log splitter is in ac-
cordance with the relevant safety requirements. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in considerable
danger to the user, and void your warranty.
DANGER!
Check that the log splitter is in sound condition and good working order.
Take immediate action to repair or replace damaged parts.
USE RECOMMENDED PARTS ONLY
- Unapproved parts may be dangerous and will
invalidate the warranty.
WARNING!
Only operate on a level and stable surface.
WARNING!
Do not allow untrained persons to operate the machine and do not oper-
ate the machine without all covers etc. correctly fitted.
WARNING! RISK OF ELECTRIC SHOCK.
Do not expose the log splitter to water spray,
rain, dripping water or moisture of any kind.
Do not move the machine when it is running.
Do not leave the machine unattended when in use. Switch the machine off and
unplug from the mains supply before leaving the work area.
Do not allow children or animals near the log splitter, particularly when in use.
Ensure that the log splitter is correctly turned off when not in use and store in a safe,
21
PARTS LIST
No.
Description
SIP Part No.
1
Work Table
WD03-00091
2
Round Cover
WD03-00092
3
Operate Handle
WD03-00093
4
Lever Handle
WD03-00094
5
Right Guard Assy
WD03-00095
6
Knob
WD03-00096
7
Clamping Fork (Right)
WD03-00097
8
Left Guard Assy
WD03-00098
9
Control Lever Shaft
WD03-00099
10
Nut
WD03-00100
11
Washer
WD03-00101
12
Hex Bolt
WD03-00102
13
Control Link Plate
WD03-00103
14
Fork
WD03-00104
15
Locknut M8
WD03-00105
16
Clamping Fork (Left)
WD03-00106
17
Knob
WD03-00107
18
Square Cover
WD03-00108
19
Nut
WD03-00109
20
Draw Rod
WD03-00110
21
Pin
WD03-00111
22
Circlip
WD03-00112
23
Plastic Insert 1
WD03-00113
24
Plastic Insert 4
WD03-00114
25
Screw M6x16
WD03-00115
26
Locknut M4
WD03-00116
27
Plastic Insert 2
WD03-00117
28
Plastic Insert 3
WD03-00118
29
Screw M6x10
WD03-00119
30
Stop Limit Plate
WD03-00120
31
Nut M16
WD03-00121
32
Switch
WD03-00122
33
Screw M4x6
WD03-00123
34
Motor
WD03-00124
35
Washer
WD03-00125
36
Bolt M10x30
WD03-00126
37
Junction Box
WD03-00127
38
Hose Clamp
WD03-00128
