12
TECHNICAL SPECIFICATIONS
ASSEMBLY INSTRUCTIONS
a. Locate both control levers.
b. Remove spring pin (A) from one
side of the machine to release the
lock pin (B).
c. Apply a thin coat of grease onto
the control lever, as shown on dia-
gram.
d. Insert the control lever into the slot
of the connection bracket (C).
e. Put the lock pin (B) through the top
hole of the connection bracket (C),
making sure that the holes on the
connection bracket and control
lever line up.
f. Once the lock pin (B) is all the way
through the bottom of the connec-
tion bracket, replace spring pin (A)
to secure to lock pin (B).
g. Repeat on the opposite side.
Grease
Part No.
01977
Input
230v ~ 50Hz, 3000w
Log Capacity -
Ø
120 mm - 320 mm
Log Capacity - length
1040 mm / 780 mm / 520 mm
Splitting Force
7 ton
Hydraulic Pressure
22 Mpa
Hydraulic Oil Capacity
5 litre
Ram Travel
480 mm
Forward Speed
3.9 cm/sec
Retract Speed
14.5 cm/sec
Noise Level - No Load
80.1 dba
Noise level - Full Load
92.5 dba
Dimensions ( HxWxL)
1470 x 930 x 830mm
Weight
115 kg
13
There are 3 positions available for the
support table for different splitting lengths
104cm / 78cm / 52cm.
Ensure that the lock down hooks (D) are
in the vertical position.
Slide the support table into the frame
brackets (E), ensuring that they hook un-
der the top of the frame brackets (E). Turn
the lock down hooks (D) to the horizontal
position to secure the support table in
place.
OPERATING INSTRUCTIONS
The log splitter is equipped with 2 wheels to allow it
to be moved to and around the work area.
Ensure the oil filler cap is fully closed
(see page
14) before moving the log splitter.
To move the log splitter:
Stand behind the log splitter.
Grip the handle (A)
Tilt the log splitter slightly towards you and move to
desired location.
ASSEMBLY INSTRUCTIONS ….cont
CAUTION:
If using a crane: lay hoist sling around the bottom housing. Nev-
er try to lift the log splitter at the Handle (A).
Moving The Log Splitter:
