SIP 01552, Руководство пользователя

Страница: 7 / 18

7
STRUCTURE AND FUNCTIONS
The planer-thicknesser is a transportable electric tool. The machine is driven by a single-phase series motor,
and it is double insulated. It is used to planer-thicknesser wood. It has the characteristics of rational
structure, easy operation and high efficiency. Refer to figure 3.
Circuit Breaker
Safety Switch
Figure 3
ELECTRICAL REQUIREMENTS
POWER SUPPLY AND MOTOR SPECIFICATIONS
WARNING:
To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection. Use a separate
electrical circuit for your tools. To avoid shock or fire, if power cord is worn or cut, or damaged in any way, have it replaced
immediately.
GROUNDING INSTRUCTIONS
WARNING:
This tool must be grounded while in use to protect the operator from electrical shock.
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides a path of least resistance for electric current and
reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment-grounding conductor
and a grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in
accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the receptacle, have the proper receptacle installed by a qualified
electrician.
IMPROPER CONNECTION of the equipment-grounding conductor can result in risk of electric shock. The conductor with
green insulation (with or without yellow stripes) is the equipment-grounding conductor. If repair or replacement of the electric
cord or plug is necessary, DO NOT connect the equipment-grounding conductor to a live terminal.
CHECK with a qualified electrician or service person if you do not completely understand the grounding instructions, or if you
are not sure the tool is properly grounded.
Refer to nether picture:
Properly Ground Outlet
Grounding Prong
3-Prong Plug
WARNING: Improper connection of equipment grounding conductor can result in the risk of electrical shock. Equipment
should be grounded while in use to protect operator from electrical shock.
Continued Overleaf