SIP 01307, Руководство пользователя

Страница: 6 / 24

6
SAFETY INSTRUCTIONS ...cont
17. USE ONLY RECOMMENDED ACCESSORIES: Consult this user manual for
recommended accessories. Follow the instructions that accompany the
accessories. The use of improper accessories may cause hazards and will
invalidate any warranty you may have.
18. REMOVE ADJUSTING KEYS AND WRENCHES: Form a habit of checking to see that
keys and adjusting wrenches are removed from the tool before every use.
19. SECURE THE WORK-PIECE: Use clamps or a vice to hold the work-piece . This
frees up both hands to operate the tool.
20. DO NOT OVERREACH: Keep proper footing and balance at all times.
21. DO NOT FORCE THE SAW: It will do the job better and more safely at the rate
which it was designed.
22. DO NOT OPERATE THE SAW IN EXPLOSIVE ATMOSPHERES: Do not use the tool in
the presence of flammable liquids, gases, dust or other combustible sources. The
motor may create sparks during normal operation which can ignite the dust or
fumes.
23. HAVE YOUR SAW REPAIRED BY A QUALIFIED PERSON: The saw is in accordance
with the relevant safety requirements. Repairs should only be carried out
by qualified persons using original spare parts, otherwise this may result in
considerable danger to the user.
24. DO NOT EXPOSE THE ABRASIVE CUT OFF SAW TO RAIN OR USE IN WET
CONDITIONS:Water entering the abrasive saw will greatly increase the risk of
electric shock.
25. DO NOT dismantle, tamper with or use the abrasive saw without all guards fitted
as this is dangerous and will invalidate the warranty.
Note: Always switch off and disconnect the mains plug before
changing or inspecting the abrasive disc.
Regularly check the expiry date of the disc; never used expired
abrasive discs - high risk of the disc shattering .





Keep hands out of the path of the abrasive disc, never reach around the abrasive disc.
Make sure the abrasive disc is clear of the workpiece before the trigger switch is pressed in.
Stop operation immediately if you notice anything abnormal.
Wait for the abrasive disc to stop completely and remove the plug from the mains supply
before servicing or adjusting the abrasive cut off saw or changing the abra-sive disc.
Be alert at all times, especially during repetitive, monotonous operations. Don't be lulled
into a false sense of security. Abrasive discs can be extremely unforgiving. Use of improper
accessories may cause damage to the abrasive cut off saw and surrounding area as well as
increasing the risk of injury.