SINTES
8
ULTRAPEEN
2. SYSTEM COMPONENTS (continued)
Ultrasonic Tool
Figure 3 shows the Ultrasonic Tool.
2 1
4 3
Figure 3.
The Ultrasonic Tool
1 – Holder
of Ultrasonic Tool
2 –
Replaceable
Working Head
3 – Tube
for compressed air. The cooling of tool by compressed air is
required for ultrasonic treatment. Air pressure is 25-35 psi.
CAUTION:
Do not operate UP system without cooling of Tool by compressed air. The
exceptions could be the verification the condition of system (5-7 seconds) and/or short
demonstration (no more than 1 minute).
4 – Cord
connecting the Tool to the Ultrasonic Generator
