Sinterit SANDBLASTER User Manual | 3
2. Safety Information
The Sinterit SANDBLASTER may create a powerful stream of abrasive particles. In order to avoid injuries and/or
property damage, carefully read the instruction manual before assembling, operating or performing maintenance of the
SANDBLASTER.
WARNING!
•
During operation, do not expose your skin or hands directly to the line of
operation of the SANDBLASTER nozzle.
•
Check that all components of the SANDBLASTER are properly sealed.
•
Do not exceed the maximum operating pressure of the SANDBLASTER.
•
Before replacing the accessories or beginning the assembly, repair,
transport, or any form of maintenance, disconnect the SANDBLASTER
from the air compressor.
•
Check the quality of all pneumatic tubings before each use. Check that all
connections are secured.
•
Do not direct the nozzle at people or objects.
ATTENTION!
After each use of the SANDBLASTER, wash your hands.
ATTENTION!
During the blowing and cleaning of printouts, dust may form. Protect your eyes
and airway. Wear the Protective Dust Mask and Protective Glasses (e.g. you
can use the „PERSONAL PROTECTION” set included with Lisa printers).
WARNING!
Risk of fire and explosion! Avoid fire! Powder dust is flammable.
Fire and explosion hazard!
Do not use the SANDBLASTER around flammable
liquids, dust, gases and other materials that are flammable or may explode.
Some abrasives may create sparks upon contact with metal. Abrasive material
similar to aluminium oxide may generate sparks that will cause fire or explosion
in a hazardous environment.
