BPI-D1 User Manual
http://www.banana-pi.com
http://www.sinovoip.com.cn
How to Program the Firmware
1. Battery mode, press and hold the "primary key" 5 seconds off D1S power.
Holding down the "function key" and micro-USB data cable connecting to
the PC, the module enters the programming mode. At this time D1S LED no
instructions.
(
Figure 10
)
2. Before the PC inserts D1S micro - USB cable, double-click firm programing
tools icon, runs the burn tool. The firm programing tools will detect the
launch of the application. Once connected, a yellow status bar will appear
next to the device in the window, and the status will show “Ready” (please
recheck and repeat the steps above if no response). Press the “Start” button
on the top to start the firm programing automatically.
(
Figure 11
)
3. Burning completed, micro-USB data cable disconnected with PC.
