Note:
The default IP address of the device is 10.1.1.10, and the subnet mask is 255.0.0.0, and the gateway is
10.1.1.200.
Note:
If the search fails or prompts the network card to report an error. Check if the status of the network
indicator is normal or replace the network cable.
Communication
After the device parameters are set successfully,
search
for the device again, and click
Refresh
in the lower-left
corner of the software to see all the point value of the device.
Read the status of DI:
The value 0 indicates "Open", the value 1 indicates "Short to GND". Use a wire to short the
DI1 and GND, you can see that the DI1 indicator is on.
Write the status of DO:
The value 1 is close between COM and NO and the DO indicator will be steady on, value
0 is open between COM and NO and the DO indicator will be off. Click on the
Pen Icon
to control the point value
of the device.
Note:
Refer to
Software Tools
for more detailed information.
C2000-A1-SDD1010-AB3 User Manual
6 / 34
SinoCon Co., Ltd.
www.sinoconsys.com
