SinoCastel IDD-213W, Руководство пользователя, Страница: 18 / 25

IDD-213W User Manual
17
5 5.. F Fu un nccttiio on nss
5 5..1 1 O OB BD D P Prro otto occo ollss
Device supports all legislated OBD II protocols, it is also SAE J1939 and SAE J1708
compliant.
¾ SAE J1850-PWM
¾ SAE J1850-VPW
¾
ISO 9141-2
¾ ISO 14230-4 (KWP2000)
¾ ISO 15765-4 (CAN)
¾ SAE J1939 (Heavy duty)
¾ SAE J1587/J1708 (Heavy duty)
5 5..2 2 LLo occa attiio on n IIn nq qu uiirryy
Upon receiving location inquiry message from server or via SMS, device reports GPS
data immediately.
5 5..3 3 R Re eg gu ulla arr G GP PS S d da atta a rre ep po orrttiin ng g
GPS data can be sampled by 3 means: by time interval, by distance or by heading
change. They can be enabled or disabled separately, only sampled by time interval is
enabled by default.
The sample rate for time interval can be 2-600s and default setting is 30s, for distance
interval can be 50-5000m and default setting is 500m, for heading change can be 5-90
°
and default setting is 15
°.
There can be single or several groups of GPS data in one GPS message, determined by
groups of GPS data per message, device will not report GPS message until it has
collected specified groups of GPS data. Groups of GPS data per message can be 1-30
and default setting is 1.
For example, sampled by time interval and sampled by distance are enabled, and the
respective settings are 10s and 500m, groups of GPS data per message is 5. Assume
that vehicle is running at speed of 72km/h (20m/s), then it takes 25s to run out of
500m, so GPS data are sampled at 10th, 20th, 25th, 30th, 40th second and reported at
40th second as 5 groups of GPS data have been collected at that time.