Sinocare Safe AQ Smart, Руководство пользователя

Страница: 10 / 26

13 14
• Discard any bottle that appears to be cracked or leaking.
• For in vitro diagnostic use only.
Performing a control solution test
Start with the blood glucose meter off. Prepare the following items before control
solution test:
a. blood glucose meter;
b. blood glucose test strip;
c. blood glucose control solution
STEP 1: Wash your Hands
Wash your hands with mild soap and water. Be sure to dry your hands before
performing a test.
STEP 2: Insert a Safe AQ Test Strip
Insert a Safe AQ Test Strip with printing face up and the contact end into the test
strip port until it cannot go any further. The blood glucose meter will turn on.
Attention: Only when meter display flashing blood drop symbol “ ”, can you apply
control solution. If there is no blood drop symbol, restart the meter again.
STEP 3: Apply the Control Solution
1. Check the expiration date and discard dates on your control solution and Safe
AQ test strip vials. Do not use control solution or test strip which expired.
2. Shake the control solution bottle well, then remove cap. Squeeze the bottle and
discard the first drop. Squeeze the bottle again to get a second drop and bring the
tip of the Safe AQ test strip to touch the drop of solution until the blood glucose
meter beeps. After 5 seconds’ count-down, meter will display control solution test
result.
3. Control test results must be within range of the control solution level printed on
test strip vial label. If the result is out of range, test again. If still so, do not use test
strips or meter for blood glucose testing. Call customer service at
+86-731-8986-731-89935582 or contact local dealers for help.
4. Eject the test strip
Attention:
Discard used test strip and control solution according to local regulations.
Keep control solution away from children and pets.