SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn
29
caller pass through and continue the incoming call flow if
Forbid PSTN
Incoming Call
is set to Enable.
FXO Echo Adjust: Specify the adjustment for FXO Echo.
FXO dial out time: Specify the duration for a single digit is pressed down.
The recommended value is an integer between 50 and 300.
FXO dial over time: Specify the time interval between two digits. The
recommended value is an integer between 80 and 300.
FXO dial delay: Specify the time interval between phone pick up and playing
back dial tone. The recommended value is an integer between 200 and 800.
Reboot System Every: Specify the interval for system to reboot automatically.
Reboot Wait Time: Specify the wait time before system reboot. It mainly
used for system to gracefully shutdown.
Max Alerting Time: Specify the max alerting duration.
Max Ringback Time: Specify the max ringback duration.
RTP Inactivity Time: Specify the max duration of silence from FXO. System
will hang up the call automatically if the silence duration reaches or exceeds
this value.
PSTN Call AutoAnswer: Specify whether need to auto-answer the call which
is from PSTN. If set to Enable,
AutoAnswer Time
can be used to specify the
delay to automatically answer the incoming PSTN call.
VoIP Call AutoAnswer: Specify whether need to auto-answer the call which
is from IP network. If set to Enable,
AutoAnswer Time
can be used to specify
the delay to automatically answer the incoming IP call.
DTMF
Mode:
Specify
the
DTMF
mode.
Option
values
are
RFC2833/Inband/SIP INFO.
RFC2833 Payload Type: Specify the RFC2833 DTMF Payload Type. Only
valid when
DTMF Mode
is set to RFC2833. The default value is 101.
G729 or G723.1: Specify the analogy port voice codec.
RTP Ptime: Specify the interval of RTP packages.
Fax
Rate:
Specify
the
fax
rate.
Option
values
are
14400/12000/9600/7200/4800/2400.
4.7 System Settings
System Settings include:
User Management
Remote Management
System Update
These sub topics will be introduced separately below.