SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn
18
For AT command, please refer to appendix 1.
Field Command Response is used to display the response of last command.
After send a command, a re-enter of this page is needed to see the command
response.
4.4.6 Billing
The screenshot below shows the operation mode to set GoIP billing. A smart
billing server for mobile port is embedded in GoIP Gateway.
Fields are specified as following:
GoIP Billing: Specify whether enable GoIP billing or not. If set to Enabled,
system will bill the outbound calls for the port which has been assigned with
billing tariffs.
Billing Type: Specify the type to get balance through USSD. Option values
are International/Internal/Local Net/Other. Each optional value maps to the
corresponding USSD Keyword in USSD Query Keyword List. The balance is
checked base on the USSD keyword which is mapped by this selected
choice. This field takes effect only when both
GoIP Billing
and
USSD Check
are set to
Enabled
.
USSD Check: Specify whether enable to get balance through USSD check
or not. This field takes effect only when
GoIP Billing
is set to
Enabled
.
Save Balance: Specify whether need to save the current balance to card
periodically. If set to Enabled, the balance will be updated to card
periodically or after a call is released.
Period: Specify the period to save balance.
Initial Balance: Special the initial balance for a new card.
The screenshot below shows the operation mode to set
Caution Balances
,
Invalid Balances
and
USSD Keyword List
. These settings are used for both
getting balance through USSD and billing GoIP calls. The provider ID is detected
by GoIP Gateway automatically. For a new Gateway without any card inserted,
there may be no records in the two lists.