Sinlaku SLK-KY018-12KC/E, Руководство пользователя

Страница: 12 / 18

Page 10
7. Installation Explanations
7.1 Installation Explanations:
- A removal air-conditioner shall be installed in the flat and empty place all around. Don’t block
the air outlet, and the required distance around should be at least 30cm. (See Fig.8)
- Should not be installed in wet location, such as the laundry room.
- Socket wiring should be in accordance with the local electric safety requirements.
Fig.8
7.2 Introduction to Exhaust Hose Installation
Temporary installation
1. Twist the housing adaptor and the window Connector to the ends of the exhaust hose.
2. Insert the fixing clip of the housing adaptor into the openings at back of the air
conditioner.
3. Put the other end of the exhaust hose to the near windowsill(see Fig.9).
Window Kit Installation
The installation manner of window slider kit is mostly in “horizontal” or “vertical”. As
shown Fig.10 and Fig.10a, check the min. and max. size of the window before the installation.
1. Install the window kit on the window (Fig.10, Fig.10a);
2. Adjust the length of the window slider kit according to the window width or height, and fix it with
the dowel;
3. Insert the window connector of the hose to the hole of the window kit(Fig.11).
7. Installation Explanations