USB
LAN
1
2
3
4
W
A
N
DSL
FXS
1&2
RESET
POWER
1/0
Telephone
cable
FXS phone
splitter
Two phones
STEP 6:
Setting Up Your mio Voice
1 mio Voice, only the “VOICE 1” LED will be
GREEN
2 mio Voice, both “VOICE 1” and “VOICE 2” LEDs will
be
GREEN
IMPORTANT
Please ensure that ALL analogue devices i.e., telephones are disconnected from wall
sockets to optimise the performance
New subscribers for mio Voice will automatically be configured with the service. The
“VOICE” LED on the Residential Gateway will turn on after 10 minutes upon successful
configuration of your BroadBand service. Thereafter, customers may proceed to connect
their supported telephones following the steps below.
A
Connect your supported telephone to the Telephone port on the Residential
Gateway using a Phone Cable (RJ11).
B
Please insert a FXS Phone Splitter to the Phone Cable (RJ11) before inserting
to the Telephone port of the Residential Gateway.
C
Connect your supported telephones to
P1
and
P2
ports respectively for both
mio Voice lines.
Congratulations! You have successfully installed mio Voice.
Continue with (B) and (C) only if you have 2 mio Voice subscriptions
INTERNET
BROADBAND
IPTV
VOICE 2
ETHERNET
WIRELESS
WPS
VOICE 1
POWER
W
P
S
INTERNET
BROADBAND
IPTV
VOICE 2
ETHERNET
WIRELESS
WPS
VOICE 1
POWER
W
P
S
Содержание Pace-5520
Страница 1: ...SingNet BroadBand mio Voice ...
