Singer Furura XL-550
11
6. Feed-dog height
Check
1. Set machine into test mode and select mode 2.
2. Raise the presser foot.
3. Bring the feed dog to its highest position by turning hand wheel.
4. The top of the feed dog ishould now be 0.9 to 1.1 mm above the needle plate.
Adjustment
1. Bring the feed dog to its highest position.
2 Remove the needle plate.
3. Loosen up the nut (A).
4. Adjust by turning the screw (B) until a correct feed dog height (0.9-1.1 mm) is obtained.
Turn clockwise : It will be higher
Turn counter clockwise : It will be lower
5. Tighten the nut (A)
3. Mount the needle plate and Re-check the feed dog height.
0.9-1.1 mm
A
B
